Other Parts
Showing 1–12 of 20 results
Air Intake Gauze Filter - Scuttle Panel
£20.00 + VAT
FF Part No. FF007602
Equivalent Part No. STC738
Spec: For Plenum Intake
Control Knob - Heater Control
£14.95 + VAT
FF Part No. FF009755
Equivalent Part No. 395204
Spec: Series III - Heater Direction DEFROST CAR
Detail: Screw NOT included - order FF010644
Control Knob - Heater Control
£8.95 + VAT
FF Part No. FF009756
Equivalent Part No. 395205
Spec: Series III - Heat Temperature COLD HOT
Detail: Screw NOT included - order FF010644
Demister Vent - Dashboard Top
£14.95 + VAT
FF Part No. FF010282
Equivalent Part No. 390699
Spec: Circular - upto AA147004
Detail: 4 required per vehicle
Foam Pad - Scuttle Panel
£20.95 + VAT
FF Part No. FF006394
Equivalent Part No. JZL100120
Spec: For Plenum Intake
Heater Control Unit - Dashboard
£418.00 + VAT
FF Part No. FF013189
Equivalent Part No. LR137071
Spec: Vehicles With Heated Seats and Heated Front Windscreen - JA000001 onwards
Detail: once fitted the new unit will need to be coded to the vehicle by diagnostic computer
Heater Locker Box
£95.00 + VAT
FF Part No. FF015563
Equivalent Part No. MUD0041-1
Spec: Black - Pipe Outlet Size 60mm
Detail: designed to offer an easy method of mounting a diesel-powered auxiliary heater into your Land Rover Defender, the MUD Heater Locker fits between the two outer front seats underneath the cubby-box, using the original factory fixing points. the heater locker bolts into the factory cubby-box fixing holes. the pre-drilled holes within the lid of the locker match those within the base of the factory cubby box. It is also possible to fit the heater locker under an aftermarket cubby box such as the Britpart cubby box which comes undrilled so you can match the pre-drilled holes on the heater locker. the cut-out within the base plate of the MUD Heater Locker has been designed to match the standard footprint of all the common 2kw auxillary diesel heaters, such as Eberspacher, Webasto, MV Airo and Planar. the budget priced Chinese 2kw heaters typically found on eBay are all copies of the established brands so they too all use this same standard footprint. please note that this footprint will need transferring to the centre base plate in the Defender seatbox and the base plate will need cutting. the slots within the front plate of the MUD heater locker provide the air-inlet. the hole in the backplate of the heater locker will accept a range of standard outlet nozzles provided with the common 2kw heater kits that use 60mm diameter pipework. the smaller slot in the rear backplate provides an entry point for routing the wiring loom into the locker. the majority of 2kw heaters use 60mm diameter pipework but we can supply alternative back plates to accept the 75mm pipework/heater outlet nozzles found within some kits and on some larger capacity heaters. the MUD heater locker can also be used as a standalone mounting locker for any 2kw diesel heater. the external dimensions of the locker are 430 (398) x 270 x 140mm To work out how high the cubby box armrest will be with the locker in place, add the height of your cubby box (including any feet/runners) to the locker height of 140mm. This listing is for the heater locker only - heater and cubby box is NOT included.
Radiator Muff
£34.95 + VAT
FF Part No. FF005807
Equivalent Part No. DA4025GREEN
Spec: Series II/IIA with headlights in grille - Black with Green Piping
Radiator Muff
£31.95 + VAT
FF Part No. FF005958
Equivalent Part No. DA2160GREEN
Spec: Series III with headlights in wing - Black with Green Piping
Radiator Upper Support Bracket Insulator
£13.50 + VAT
FF Part No. FF011186
Equivalent Part No. PCU000220
Detail: 2 required per vehicle
Rubber Grommet
£25.50 + VAT
FF Part No. FF008171
Equivalent Part No. PJZ100170
Spec: Td4 - Turbocharger to Air Duct