Cooling & Heating
Showing 409–420 of 2299 results
Electric Radiator Fan Kit
£215.00 + VAT
FF Part No. FF004026
Equivalent Part No. TWIN.12.HP.B/S12V
Spec: V8
Electric Radiator Fan Kit
£215.00 + VAT
FF Part No. FF004026
Equivalent Part No. TWIN.12.HP.B/S12V
Spec: V8
Electric Radiator Fan Kit
£139.00 + VAT
FF Part No. FF001050
Equivalent Part No. 14HP-1
Spec: 4-Cyl Normally Aspirated Diesel
Electronic Cooling Fan Kit
£335.95 + VAT
FF Part No. FF015313
Equivalent Part No. DA8976
Spec: V8 3.5 Petrol - NOT Vehicles With Air Con
Detail: twin 13 inch Revotec suction fans and controller technology with vehicle specific fan mounting brackets, for the ultimate cooling package. > Adjustable temperature range of 70 - 120ºC > Instant response > No interruption to water flow > Simple to install with no leaks! > Only 3 wires to connect COMEX Electric Fan > Lightweight, slimline body > Low noise > Finger guard > Balanced blades > High output, long-life design > Rated to run continuously > Waterproofed to IP68 Fan Mounting Kit > No permanent modifications required > Vehicle specific brackets > Laser cut > Engineered to fit perfectly > Fitting kit which includes all necessary fittings
Electronic Cooling Fan Kit
£255.95 + VAT
FF Part No. FF015321
Equivalent Part No. DA8967
Spec: 200 & 300 Tdi - Not Vehicles With Aircon
Detail: 35mm Revotec Land Rover Fan Controller mated to 15.2 inch (385mm) High Power Suction fan. includes mounting brackets and all necessary hardware & Instructions Benefits of fitting an electric fan: > Engine reaches operating temperature quickly, reducing wear. > Sufficient cooling when needed i.e. sitting in traffic idling. > Overcome hotter running caused by modern fuel. > Increased performance. > Improved fuel economy. > Reduced load on engine. What makes Revotec products unique: > Quality- Fan Controller made to do the job, manufactured in the UK. > Retrofitted without any modification, keeping vehicle originality. > High quality OEM parts and components used throughout. > Each kit contains vehicle specific brackets designed to fit without permanent modification. > Each kit has been developed to give an OEM fit and appearance. > Each kit consists of a controller, fan and all necessary mounting hardware. Revotec Electronic Fan Controller vs probe type mechanical switch: > No leaks - A capillary device is prone to poor sealing > The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature. > No restriction of coolant flow. > Always in contact with the water – giving a more accurate temperature reading.
Electronic Cooling Fan Kit
£255.95 + VAT
FF Part No. FF015321
Equivalent Part No. DA8967
Spec: 200 Tdi - Not Vehicles With Aircon
Detail: 35mm Revotec Land Rover Fan Controller mated to 15.2 inch (385mm) High Power Suction fan. includes mounting brackets and all necessary hardware & Instructions Benefits of fitting an electric fan: > Engine reaches operating temperature quickly, reducing wear. > Sufficient cooling when needed i.e. sitting in traffic idling. > Overcome hotter running caused by modern fuel. > Increased performance. > Improved fuel economy. > Reduced load on engine. What makes Revotec products unique: > Quality- Fan Controller made to do the job, manufactured in the UK. > Retrofitted without any modification, keeping vehicle originality. > High quality OEM parts and components used throughout. > Each kit contains vehicle specific brackets designed to fit without permanent modification. > Each kit has been developed to give an OEM fit and appearance. > Each kit consists of a controller, fan and all necessary mounting hardware. Revotec Electronic Fan Controller vs probe type mechanical switch: > No leaks - A capillary device is prone to poor sealing > The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature. > No restriction of coolant flow. > Always in contact with the water – giving a more accurate temperature reading.
Electronic Cooling Fan Kit
£255.95 + VAT
FF Part No. FF015321
Equivalent Part No. DA8967
Spec: 300 Tdi - Not Vehicles With Aircon
Detail: 35mm Revotec Land Rover Fan Controller mated to 15.2 inch (385mm) High Power Suction fan. includes mounting brackets and all necessary hardware & Instructions Benefits of fitting an electric fan: > Engine reaches operating temperature quickly, reducing wear. > Sufficient cooling when needed i.e. sitting in traffic idling. > Overcome hotter running caused by modern fuel. > Increased performance. > Improved fuel economy. > Reduced load on engine. What makes Revotec products unique: > Quality- Fan Controller made to do the job, manufactured in the UK. > Retrofitted without any modification, keeping vehicle originality. > High quality OEM parts and components used throughout. > Each kit contains vehicle specific brackets designed to fit without permanent modification. > Each kit has been developed to give an OEM fit and appearance. > Each kit consists of a controller, fan and all necessary mounting hardware. Revotec Electronic Fan Controller vs probe type mechanical switch: > No leaks - A capillary device is prone to poor sealing > The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature. > No restriction of coolant flow. > Always in contact with the water – giving a more accurate temperature reading.
Electronic Cooling Fan Kit
£249.50 + VAT
FF Part No. FF017229
Equivalent Part No. DA8970P
Spec: V8 Petrol - 385mm Diameter High Power Suction Fan
Detail: supplied with necessary fittings and fixings including mounting brackets or shroud, 35mm Revotec electronic fan controller and loom, earth wire kit and nuts and bolts. no permanent modifications to radiator or mountings is required. easy to install with basic hand tools. modern 385mm diameter fan and microchip controller technology used together for the ultimate cooling package. designed for use with factory fitted engine in standard spec only
Electronic Cooling Fan Kit
£249.50 + VAT
FF Part No. FF017230
Equivalent Part No. DA8970D
Spec: Diesel - 385mm Diameter High Power Suction Fan
Detail: supplied with necessary fittings and fixings including mounting brackets or shroud, 35mm Revotec electronic fan controller and loom, earth wire kit and nuts and bolts. no permanent modifications to radiator or mountings is required. easy to install with basic hand tools. modern 385mm diameter fan and microchip controller technology used together for the ultimate cooling package. designed for use with factory fitted engine in standard spec only
Engine Cooling Fan
£21.95 + VAT
FF Part No. FF008936
Equivalent Part No. ERR3439
Spec: V8 - Black - 17 inch - 11 Blade
Engine Cooling Fan
£21.95 + VAT
FF Part No. FF008936
Equivalent Part No. ERR3439
Spec: V8 - Black - 17 inch - 11 Blade - MA646645 onwards