Front Axle
Showing 1–12 of 212 results
Adaptor for Axle Breather Pipe
£4.65 + VAT
FF Part No. FF006372
Equivalent Part No. FTC5085
Spec: XA159807 (approx 1998) onwards
Adaptor for Axle Breather Pipe
£4.45 + VAT
FF Part No. FF015982
Equivalent Part No. FTC5085GEN
Spec: XA159807 (approx 1998) onwards
Air Locker Diff Kit - 10 Spline
£749.95 + VAT
FF Part No. FF011536
Equivalent Part No. DA4191
Spec: up to KA930455 (approx 1993)
Air Locker Diff Kit - 24 Spline
£749.95 + VAT
FF Part No. FF011537
Equivalent Part No. DA4193
Spec: LA930456 (approx 1994) onwards
Detail: Some vehicles have crown wheel bolts which cannot be reused and must be replaced. Consult service manual.
Air Tank for On Board Compressor
£154.95 + VAT
FF Part No. FF011532
Equivalent Part No. 171507
Spec: Aluminium - 4 Litre Capacity
Detail: For use with FF011526 or FF011518 compressors. Max working pressure 150 PSI. 50 per cent lighter than an equivalent steel tank.
ARB Differential Breather Kit
£64.95 + VAT
FF Part No. FF011531
Equivalent Part No. 170112
Spec: For up to 4 Breathers
Detail: Kit consists of anodised aluminium manifold with 4 ports and 2 mounting holes 4 x 1/8 inch BSP ports for connecting up to 4 breather lines Air filter assembly 4 x 8mm-1/8 inch BSP push in fittings 3 x 1/8 inch BSP plugs for plugging unused ports 8 metres of 8mm Polyethylene tubing 2 x self tapping screws 10 x cable ties
ARB Differential Breather Kit
£64.95 + VAT
FF Part No. FF011531
Equivalent Part No. 170112
Spec: For up to 4 Breathers
Detail: Kit consists of anodised aluminium manifold with 4 ports and 2 mounting holes 4 x 1/8 inch BSP ports for connecting up to 4 breather lines Air filter assembly 4 x 8mm-1/8 inch BSP push in fittings 3 x 1/8 inch BSP plugs for plugging unused ports 8 metres of 8mm Polyethylene tubing 2 x self tapping screws 10 x cable ties
Ashcroft Pneumatic Air Locker Kit - 24 Spline
£675.95 + VAT
FF Part No. FF010830
Equivalent Part No. DA1224
Detail: Must be used in conjunction with on-board Air Compressor. Can only be fitted with 24 Spline halfshafts. Fitting instructions supplied. Assembly into your existing differential casing is required. Key Features are Full 6mm of locking collar engagement. Static annular piston to minimise risk of air leaks. Large diameter piston gives a 55 per cent increase of hold in force over competitors High spec materials throughout
Ashcroft Torque Biasing Limited Slip Differential (ATB) - 24 Spline
£395.95 + VAT
FF Part No. FF015292
Equivalent Part No. DA9011
Detail: Can only be fitted with 24 Spline halfshafts. Helical Gear type LSD with six gear pockets. Assembly into your existing differential casing is required. Key Features are Fully automatic - needs no driver input Totally transparent on road - no unwanted adverse effects Only comes into play when one wheel looses traction i.e a difference in wheel speed Enhances the traction control as it multiplies the bias load created by the braking effect of the traction control Needs no adjustment as the gears compensate for any wear that takes place. bearings not supplied - order 2 x FF007170
Axle Breather Pipe
£32.95 + VAT
FF Part No. FF004772
Equivalent Part No. FTC2177
Spec: 90 - up to WA159806 (approx 1998)
Axle Breather Pipe
£33.50 + VAT
FF Part No. FF004776
Equivalent Part No. TAP100010
Spec: Standard Suspension - XA159807 (approx 1998) onwards
Axle Breather Pipe
£47.50 + VAT
FF Part No. FF004777
Equivalent Part No. TAP100020
Spec: Heavy Duty Suspension - XA159807 (approx 1998) onwards