Dashboard & Consoles
Showing 1–12 of 27 results
Dashboard Centre Console
£62.50 + VAT
FF Part No. FF005408
Equivalent Part No. MUD-0002
Spec: upto WA159806 (approx 1998)
Detail: supplied as blank for you to cut your own holes as required. see our range of Carling switches and switch apertures to fit.
Dashboard Centre Console
£62.50 + VAT
FF Part No. FF010428
Equivalent Part No. MUD-0003
Spec: XA159802 to 1A622423 (approx 1999 to 2001)
Detail: supplied as blank for you to cut your own holes as required. see our range of Carling switches and switch apertures to fit.
Dashboard Centre Console
£134.95 + VAT
FF Part No. FF012051
Equivalent Part No. FWJ000110PMA
Spec: 2A622424 to 6A999999 (approx 2002 to 2006)
Detail: with pre-cut holes
Dashboard Centre Console
£123.95 + VAT
FF Part No. FF012170
Equivalent Part No. TF908
Spec: Suitable for Vehicles upto 2001. Order with Switch Kit FF012171
Detail: provides effective location for a CD player or CB as well as additional gauges and switches as required. manufactured from a combination of steel and alloy mountings with a textured plastic finish. fitting kit and switch blanking panel included. switch kit FF012171 available separately.
Dashboard Conversion Kit to Td5 Style
£450.00 + VAT
FF Part No. FF013833
Equivalent Part No. FF013833
Spec: Left Hand Drive - for Earlier Vehicles upto 1A622423 (approx 2001)
Check Availability
Detail: GRP kit designed to fit the existing dashboard and the existing pre-Td5 vent flap opening knobs. a basic guide to fitting: unscrew dashboard top remove any radio and housing if fitted. remove the original grey dash trim that is just popped into place cut the raised area of your dash bottom so the new trim can sit into place. sit this new section into place above your bottom dash. attach to your lower dash using self tapping screws (as per original on 02-06 models) using 4 recessed screw holes. where the vent lever lifts up and down open the hole up slightly with a stanley knife or file as the vent lever is wider on the pre 02 type dash than it is the 02 onwards dash. refit the dash top again. this clamps the top in place, however originally they are also held in place to the underside of the dash top with small taper headed screws, so re use the same screws that held the old grey dash piece into place to secure the top of the new dash . this is a very brief run through of fitting and there will be other minor steps required to fit. this is essentially a blank canvas and you can cut whatever holes you want to add the switches you want. If you just want to replicate the original features of the 83-02 models you need to cut the hole for the cigar lighter in the recess on the left of the panel, and then cut a hole for the wash wipe switch in the recess on the right side of the panel. the centre dash is screwed into place and removes just like the original. the moulding on these is extremely good with the same grain texture to the main section as original, so once fitted looks and feels original. please remember these are a retrofit kit and although straightforward to fit for most people, you still need to have some common sense when fitting or find a professional to fit for you.
Dashboard Instrument Facia Cover
£218.50 + VAT
FF Part No. FF008637
Equivalent Part No. VPLDS0249MEN
Spec: Indus Silver - 7A000001 (approx 2007) onwards
Check Availability
Dashboard Instrument Surround Set
£69.00 + VAT
FF Part No. FF017220
Equivalent Part No. FF017220
Spec: Vehicles WITHOUT Time Clock - from FA453192 (approx 1989) to 6A999999 (approx 2006)
Detail: set of 4 circular polished aluminium self-adhesive surrounds - 1 large for the speedometer and 3 smaller ones for the instrument gauges next to the speedo. they have rounded outer edges with angled centres, and are easily fitted without removal of any dashboard components. simply degrease the instrument clock faces and fit the new surrounds into place. also available special order in a range of anodized colours - contact us for details.
Dashboard Instrument Surround Set
£69.00 + VAT
FF Part No. FF017221
Equivalent Part No. FF017221
Spec: Vehicles WITH Time Clock - from FA453192 (approx 1989) to 6A999999 (approx 2006)
Detail: set of 4 circular polished aluminium self-adhesive surrounds - 1 large for the speedometer and 3 smaller ones for the instrument gauges next to the speedo. this set includes one surround with two small extra holes, for the time clock, allowing for access to the time adjustment buttons. all surrounds have rounded outer edges with angled centres, and are easily fitted without removal of any dashboard components. simply degrease the instrument clock faces and fit the new surrounds into place. also available special order in a range of anodized colours - contact us for details.
Dashboard Top Windscreen Demister Vent Surrounds - Pair
£149.00 + VAT
FF Part No. FF014475
Equivalent Part No. FF014475
Spec: from FA453192 (approx 1989) to 6A999999 (approx 2006)
Detail: polished aluminium. alan key headed fixing screws included. also available special order in a range of anodized colours - contact us for details.
Dashboard Warning Light Cluster Surround Trim
£27.00 + VAT
FF Part No. FF017222
Equivalent Part No. FF017222
Spec: from XA159807 (approx 1998) to 6A999999 (approx 2006)
Detail: self adhesive billeted and polished aluminium surround trim designed exclusively for Td5 models only. with chamfered inner edges and rounded outer edges, and easily fitted without removal of any dashboard components. simply degrease the surface and fit the new surround into place. also available special order in a range of anodized colours - contact us for details.
Dashboard Warning Light Cluster Surround Trim
£27.00 + VAT
FF Part No. FF017223
Equivalent Part No. FF017223
Spec: upto XA159806 (approx 1998)
Detail: billeted and polished aluminium surround trim designed exclusively for pre-Td5 models only. with chamfered inner edges and rounded outer edges, and easily fitted. held in place by the screws that secure the warning panel to the dash binnacle. simply remove the two screws, and re-fit them with the new surround added. also available special order in a range of anodized colours - contact us for details.
Demister Kit
£140.95 + VAT
FF Part No. FF008767
Equivalent Part No. DA1205
Spec: Includes Front Side Window Vents - up to 6A999999 (approx 2006)
Detail: This Defender demister kit will improve the demisting of your windscreen as it is better than the standard fitted demister and has the added bonus that it will also demist your side windows too. Supplied with full fitting instructions. It is necessary to drill two small holes in to the vertical sides of your dashboard for the side vents.