Interior Accessories
Showing 217–228 of 306 results
Grab Handle - Windscreen A Pillar
£37.95 + VAT
FF Part No. FF016466
Equivalent Part No. DA8868
Spec: Black Anodised Aluminium
Detail: fixing screws included
Grab Handle - Windscreen A Pillar
£37.95 + VAT
FF Part No. FF016467
Equivalent Part No. DA8869
Spec: Silver Anodised Aluminium
Detail: fixing screws included
Heater Deflector for Lower Dashboard
£31.50 + VAT
FF Part No. FF010402
Equivalent Part No. PHD
Spec: 7A000001 (approx 2007) onwards
Detail: This Heater Deflector moulded panel solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders by redirecting the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs, to create a more comfortable driving environment. The easy to fit panel is supplied with push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the panel, drill the fixing holes in the lower dash section and fix the moulding in place using the push-fit fasteners.
Heater Locker Box
£95.00 + VAT
FF Part No. FF015563
Equivalent Part No. MUD0041-1
Spec: Black - Pipe Outlet Size 60mm
Detail: designed to offer an easy method of mounting a diesel-powered auxiliary heater into your Land Rover Defender, the MUD Heater Locker fits between the two outer front seats underneath the cubby-box, using the original factory fixing points. the heater locker bolts into the factory cubby-box fixing holes. the pre-drilled holes within the lid of the locker match those within the base of the factory cubby box. It is also possible to fit the heater locker under an aftermarket cubby box such as the Britpart cubby box which comes undrilled so you can match the pre-drilled holes on the heater locker. the cut-out within the base plate of the MUD Heater Locker has been designed to match the standard footprint of all the common 2kw auxillary diesel heaters, such as Eberspacher, Webasto, MV Airo and Planar. the budget priced Chinese 2kw heaters typically found on eBay are all copies of the established brands so they too all use this same standard footprint. please note that this footprint will need transferring to the centre base plate in the Defender seatbox and the base plate will need cutting. the slots within the front plate of the MUD heater locker provide the air-inlet. the hole in the backplate of the heater locker will accept a range of standard outlet nozzles provided with the common 2kw heater kits that use 60mm diameter pipework. the smaller slot in the rear backplate provides an entry point for routing the wiring loom into the locker. the majority of 2kw heaters use 60mm diameter pipework but we can supply alternative back plates to accept the 75mm pipework/heater outlet nozzles found within some kits and on some larger capacity heaters. the MUD heater locker can also be used as a standalone mounting locker for any 2kw diesel heater. the external dimensions of the locker are 430 (398) x 270 x 140mm To work out how high the cubby box armrest will be with the locker in place, add the height of your cubby box (including any feet/runners) to the locker height of 140mm. This listing is for the heater locker only - heater and cubby box is NOT included.
Heritage Coloured Collars - Gear Knob & Transfer Knob
£12.50 + VAT
FF Part No. FF016586
Equivalent Part No. MUD-0084
Spec: Puma 7A000001 (approx 2007) onwards
Detail: a pair of coloured collars for the 6 speed gearlevers, inspired by the Heritage models. a yellow gear shifter collar and a red transfer box shifter collar are made from injection moulded elastomer. no tools required to fit - carefully roll the collars over the knobs, taking care not to stretch them.
Jump Leads - Heavy Duty Copper
£66.50 + VAT
FF Part No. FF007203
Equivalent Part No. RBC500
Spec: 5 Metre x 50mm - 600 Amp Rated
Jump Starter and Charger Pack
£94.95 + VAT
FF Part No. FF009323
Equivalent Part No. DA1239EU
Spec: EU Plug - 12V battery jump starter with charging facility for many types of phones, laptops, tablets, etc.
Detail: UK MARKET ONLY - NOT AVAILABLE FOR EXPORT Multi-function jump starter & charger for electronic products : Lap tops Mobile phones Portable games Tablets Portable DVD Music players Plus much more... Small and lightweight high capacity nano lithium polymer portable power pack with the latest battery technology. Supports fast charging with low self-discharge cycle. Charging cycles can reach more than 1,000 times. Supports 12V jump starts as well as back up charging for many brands of mobile phones, laptops, tablets, portable refrigerators etc. Supports 3 different types of charging modes. Built in redundant electronic control safety protection for jump starter over-charging and over-discharging. Technical Specifications Size - 230 x 87 x 27mm Weight - 615g Output - 5V = 1A (smart phone/tablet fast charge) Output - 12V = 10A Output - 19V = 3.5A (lap tops/notebooks) Input - 14V = 1A Battery volume - 18,000mAh Starting current - 300A Peak current - 600A
Jump Starter and Charger Pack - UK MARKET ONLY - NOT AVAILABLE FOR EXPORT
£94.95 + VAT
FF Part No. FF009322
Equivalent Part No. DA1239
Spec: UK Plug - 12V battery jump starter with charging facility for many types of phones, laptops, tablets, etc.
Detail: Multi-function jump starter & charger for electronic products : Lap tops Mobile phones Portable games Tablets Portable DVD Music players Plus much more... Small and lightweight high capacity nano lithium polymer portable power pack with the latest battery technology. Supports fast charging with low self-discharge cycle. Charging cycles can reach more than 1,000 times. Supports 12V jump starts as well as back up charging for many brands of mobile phones, laptops, tablets, portable refrigerators etc. Supports 3 different types of charging modes. Built in redundant electronic control safety protection for jump starter over-charging and over-discharging. Technical Specifications Size - 230 x 87 x 27mm Weight - 615g Output - 5V = 1A (smart phone/tablet fast charge) Output - 12V = 10A Output - 19V = 3.5A (lap tops/notebooks) Input - 14V = 1A Battery volume - 18,000mAh Starting current - 300A Peak current - 600A
Knob - Air Vent Contol
£15.95 + VAT
FF Part No. FF009614
Equivalent Part No. DA8947
Spec: Black Anodised Aluminium - up to 6A999999 (approx 2006)
Knob - Air Vent Contol
£15.95 + VAT
FF Part No. FF009615
Equivalent Part No. DA8948
Spec: Silver Anodised Aluminium - up to 6A999999 (approx 2006)
Leather Effect Gaiter - for Gear Lever
£21.95 + VAT
FF Part No. FF005676
Equivalent Part No. DA5498
Spec: Grey - upto 6A999999 (approx 2006) - no fixings required
Leather Effect Gaiter - for Gear Lever
£19.95 + VAT
FF Part No. FF011982
Equivalent Part No. DA5497
Spec: Black - 7A000001 (approx 2007) onwards - no fixings required