Interior

Heated Seat Kit - 2 Front Outer Bases and Backs

£84.95 + VAT

FF Part No. FF008952

Equivalent Part No. DA5717

Detail: For seats with removable covers. 2 heating levels Stage I - pleasant permanent heat Stage II - heat-up. Installation kit for front driver and passenger seat with four heating elements. Pre-assembled cable set with switching relay and two illuminated switches for universal use. Integrated temperature guard. Heating elements made of extremely flexible coated wires. Instructions included. Enjoy comfortable seat heating in a matter of seconds with these retrofit insert seat heaters. Highly flexible, coated heating elements for seat base and back are placed between the upholstery and seat cover without altering the shape of the seats. The heater is connected to the 12V on-board power supply using a ready-made cable set with switches for the drivers seat and passengers seat with the heat output able to be set at two stages. Integrated temperature sensors protect against overheating. The seat heater can be fitted to any seat with a removable cover. Operating voltage: 12 Volt Output: Stage I: 44 watts Stage II: 90 watts Dimensions: Seat: 400 x 280mm Backrest: 300 x 280mm Test mark: e-approved to 95/54/EC (EMC guidelines for vehicles)

Login to use wishlist

Heater Control Plate

£65.00 + VAT

FF Part No. FF011859

Equivalent Part No. MTC7577

Spec: March 1983 onwards

Check Availability

Login to use wishlist

Heater Control Unit - Dashboard

£418.00 + VAT

FF Part No. FF013189

Equivalent Part No. LR137071

Spec: Vehicles With Heated Seats and Heated Front Windscreen - JA000001 onwards

Detail: once fitted the new unit will need to be coded to the vehicle by diagnostic computer

Login to use wishlist

Heater Locker Box

£95.00 + VAT

FF Part No. FF015563

Equivalent Part No. MUD0041-1

Spec: Black - Pipe Outlet Size 60mm

Detail: designed to offer an easy method of mounting a diesel-powered auxiliary heater into your Land Rover Defender, the MUD Heater Locker fits between the two outer front seats underneath the cubby-box, using the original factory fixing points. the heater locker bolts into the factory cubby-box fixing holes. the pre-drilled holes within the lid of the locker match those within the base of the factory cubby box. It is also possible to fit the heater locker under an aftermarket cubby box such as the Britpart cubby box which comes undrilled so you can match the pre-drilled holes on the heater locker. the cut-out within the base plate of the MUD Heater Locker has been designed to match the standard footprint of all the common 2kw auxillary diesel heaters, such as Eberspacher, Webasto, MV Airo and Planar. the budget priced Chinese 2kw heaters typically found on eBay are all copies of the established brands so they too all use this same standard footprint. please note that this footprint will need transferring to the centre base plate in the Defender seatbox and the base plate will need cutting. the slots within the front plate of the MUD heater locker provide the air-inlet. the hole in the backplate of the heater locker will accept a range of standard outlet nozzles provided with the common 2kw heater kits that use 60mm diameter pipework. the smaller slot in the rear backplate provides an entry point for routing the wiring loom into the locker. the majority of 2kw heaters use 60mm diameter pipework but we can supply alternative back plates to accept the 75mm pipework/heater outlet nozzles found within some kits and on some larger capacity heaters. the MUD heater locker can also be used as a standalone mounting locker for any 2kw diesel heater. the external dimensions of the locker are 430 (398) x 270 x 140mm To work out how high the cubby box armrest will be with the locker in place, add the height of your cubby box (including any feet/runners) to the locker height of 140mm. This listing is for the heater locker only - heater and cubby box is NOT included.

Login to use wishlist