Winches
Showing 1–12 of 43 results
9.5ti Thermometric Self-Recovery Winch 12 Volt
£1,222.98 + VAT
FF Part No. FF003439
Equivalent Part No. 95000
Detail: The new 9.5ti packs 9500 lbs of pulling capacity into a 12.5 lb aluminum die-cast body. The new shape not only looks great, but keeps out the elements better than any other winch on the market. Top quality seals give all-important water resistance. The winches thermometric indicator gives the operator information about motor temperature during the winching operation, ensuring both safety and peace of mind.
9.5xp Self-Recovery Winch 12 Volt
£1,590.00 + VAT
FF Part No. FF003438
Equivalent Part No. 86500
Detail: 9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions. The 9.5xp winch features a High Output Parallel Series Wound winch motor thats the strongest and most durable in the Warn range. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding operations. Full face contact drum seals, motor and end housing gaskets deliver great water resistance.
Bow Motor 1 - Replacement Winch Motor 12V
£195.00 + VAT
FF Part No. FF008588
Equivalent Part No. BOWMOTOR1
Spec: 5.6HP 4000RPM - State Winch Details Before Ordering - May Require FF009666
Detail: The 5.6HP Bow motor is available in both 12V & 24V & can be universally fitted to most electric winches. Designed to provide high power & torque levels with incredible reliability & at a respectable price tag. The Bow motor also features a low amperage draw when compared to other commonly used motors such as the Warn XP 6HP unit. These motors offer greater low speed and mid range torque, and have a slower off line retrieval speeds than the Warn XP or Bowmotor2. The Bowmotor 1 is a very resilient motor and is favoured for “Over-Volting†(this is when 24v is passed through 12v motors) by many top crews. Suitable for Most Electric winches with splined drive gear If fitting to the older Warn 8274 with a keyway type armature shaft, then you will also need to replace the pinion gear with the later type Splined Pinion Gear (FF009666) Benefits of the 5.6HP Bow motor are: - Availability in Both 12 & 24 Volt 5.6HP providing great power & torque 4000rpm Off Load Speed Impressive reliability Lower power consumption (Compared to Warn XP 6HP motor) Great value price tag
Bow Motor 2 - Replacement Winch Motor 12V
£205.00 + VAT
FF Part No. FF008589
Equivalent Part No. BOWMOTOR2
Spec: 6.8HP 5000RPM - State Winch Details Before Ordering - May Require FF009666
Detail: The Bow motor 2 6.8HP is available 12V can be universally fitted to most electric winches as long as the winch mounting can accommodate the motors additional length. Designed to provide high power & torque levels with incredible reliability & at a respectable price tag. The Bow motor 2 as also features a low amperage draw when compared to other commonly used motors such as the Warn XP 6HP unit. These motors offer greater high speed and mid range torque and have a faster off line retrieval speeds than the Bowmotor 1 and are similar to the Warn XP. The Bowmotor 2 is a very resilient motor and is favoured for “over-volting†(this is when 24v is passed through 12v motors) by many top crews including Croatia Trophy winner Jim Marsden, Malaysian Rainforest Challenge winner Simon Buck, Chris Abel and Steve Gittens. This motor does not like to be stalled and will be damaged if this happens. The motor has an ‘O’ ring seal on the end cap to waterproof it and we recommend sealing the F1, F2 and A terminals with silicon sealant upon fitment. These motors feature heavy duty copper armature windings, which are copper welded to the commutator, with highly efficient roller bearings at each end. Four enormous long lasting brushes enable the motor to run cooler. If fitting to the older Warn 8274 with a keyway type armature shaft, then you will also need to replace the pinion gear with the later type Splined Pinion Gear (FF009666)
Bow Motor 3 - Replacement Winch Motor 12V
£275.00 + VAT
FF Part No. FF008590
Equivalent Part No. BOWMOTOR3
Detail: These tried and tested incredibly powerful Bow ‘3’s feature the following: The nominal speed is 4,000 rpm, similar to a Bow ‘1’ but with a huge amount of torque and rated at an amazing 9HP. Huge 5†diameter x 10†long (125 x 252mm) housing complete with adaptor to not only help the motor to run cooler, but also to contain a massive armature and copper welded commutator. 8 huge brushes, each with twin insulated flexible copper wires located in solid brass brush holders mounted in a cast aluminium frame to take away some of the heat and provide a bearing block at the back end. 4 large field coils surround the armature all connected with heavy copper bus bars. All in all a motor and a half!! These motors will fit straight onto any GP80 series winch, or any GP Twin Motor Top Housing and, with a small amount of modification to the adaptor, will easily fit to a standard Warn 8274 (instructions supplied) but we would recommend that one of our uprated mainshafts are fitted if not already. To get the best out of these motors you will need a very good battery setup, ideally 3 big 12 volt batteries in parallel driven by a big alternator– a 150 amp one would be brilliant. The supplied adaptor allows these Bow ‘3’s to be bolted onto the Bow ‘1’ & ‘2’ etc fixing holes on the winch.
Discrete Winch Mount
£195.00 + VAT
FF Part No. FF007228
Equivalent Part No. TF096
Spec: Contact us to ensure your winch will fit
Discrete Winch Mount
£195.00 + VAT
FF Part No. FF007228
Equivalent Part No. TF096
Spec: Contact us to ensure your winch will fit
M8000 Self-Recovery Winch 12 Volt
£679.00 + VAT
FF Part No. FF003436
Equivalent Part No. 88502
Detail: An outstanding value winch for lighter trucks. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Pulls a fast 8 ft. per minute at rated load.
M8274-50 Self-Recovery Winch 12 Volt
£1,198.00 + VAT
FF Part No. FF003440
Equivalent Part No. 38631
Detail: Loved by off-roaders who compete, the WARN M8274-50 is one of WARNs fastest winches. No load retrieval speed is 73.4 feet per minute. At 150 feet of 5/16" cable, it also has a very long line capacity. Its unique spur-gear drive train and upright design are totally rugged and it's ratchet and pawl braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.
Tabor 10K Winch 12 Volt
£599.00 + VAT
FF Part No. FF007514
Equivalent Part No. 88395
Detail: Low cost and legendary WARN quality, the Tabor 10K is a great option for anyone looking for a reliable occasional use recovery system.
TABOR 12K Self-Recovery Winch 12 Volt
£669.00 + VAT
FF Part No. FF005440
Equivalent Part No. 88400
Detail: Low cost and legendary WARN quality, the Tabor 12K is a great option for anyone looking for a reliable occasional use recovery system on a heavier vehicle.