Bow Motor 3 – Replacement Winch Motor 12V
£275.00 + VAT
FF Part No. FF008590
Equivalent Part No. BOWMOTOR3
This is compatible with some models
Please check description / fitment details to confirm
Spec: 9HP 4000RPM - State Winch Details Before Ordering
Detail: These tried and tested incredibly powerful Bow ‘3’s feature the following: The nominal speed is 4,000 rpm, similar to a Bow ‘1’ but with a huge amount of torque and rated at an amazing 9HP. Huge 5†diameter x 10†long (125 x 252mm) housing complete with adaptor to not only help the motor to run cooler, but also to contain a massive armature and copper welded commutator. 8 huge brushes, each with twin insulated flexible copper wires located in solid brass brush holders mounted in a cast aluminium frame to take away some of the heat and provide a bearing block at the back end. 4 large field coils surround the armature all connected with heavy copper bus bars. All in all a motor and a half!! These motors will fit straight onto any GP80 series winch, or any GP Twin Motor Top Housing and, with a small amount of modification to the adaptor, will easily fit to a standard Warn 8274 (instructions supplied) but we would recommend that one of our uprated mainshafts are fitted if not already. To get the best out of these motors you will need a very good battery setup, ideally 3 big 12 volt batteries in parallel driven by a big alternator– a 150 amp one would be brilliant. The supplied adaptor allows these Bow ‘3’s to be bolted onto the Bow ‘1’ & ‘2’ etc fixing holes on the winch.
