Winching Accessories
Showing 37–48 of 99 results
Battery Isolator Switch
£7.45 + VAT
FF Part No. FF005557
Equivalent Part No. DA2037
Detail: Twin Terminal - Supplied With Two Keys.
Battery Isolator Switch
£7.45 + VAT
FF Part No. FF005557
Equivalent Part No. DA2037
Detail: Twin Terminal - Supplied With Two Keys.
Battery Isolator Switch
£7.45 + VAT
FF Part No. FF005557
Equivalent Part No. DA2037
Detail: Twin Terminal - Supplied With Two Keys.
Bow Motor 1 - Replacement Winch Motor 12V
£195.00 + VAT
FF Part No. FF008588
Equivalent Part No. BOWMOTOR1
Spec: 5.6HP 4000RPM - State Winch Details Before Ordering
Detail: The 5.6HP Bow motor is available in both 12V & 24V & can be universally fitted to most electric winches. Designed to provide high power & torque levels with incredible reliability & at a respectable price tag. The Bow motor also features a low amperage draw when compared to other commonly used motors such as the Warn XP 6HP unit. These motors offer greater low speed and mid range torque, and have a slower off line retrieval speeds than the Warn XP or Bowmotor2. The Bowmotor 1 is a very resilient motor and is favoured for “Over-Volting†(this is when 24v is passed through 12v motors) by many top crews. Suitable for Most Electric winches with splined drive gear If fitting to the older Warn 8274 with a keyway type armature shaft, then you will also need to replace the pinion gear with the later type Splined Pinion Gear (FF009666) Benefits of the 5.6HP Bow motor are: - Availability in Both 12 & 24 Volt 5.6HP providing great power & torque 4000rpm Off Load Speed Impressive reliability Lower power consumption (Compared to Warn XP 6HP motor) Great value price tag
Bow Motor 2 - Replacement Winch Motor 12V
£205.00 + VAT
FF Part No. FF008589
Equivalent Part No. BOWMOTOR2
Spec: 6.8HP 5000RPM - State Winch Details Before Ordering - May Require FF009666
Detail: The Bow motor 2 6.8HP is available 12V can be universally fitted to most electric winches as long as the winch mounting can accommodate the motors additional length. Designed to provide high power & torque levels with incredible reliability & at a respectable price tag. The Bow motor 2 as also features a low amperage draw when compared to other commonly used motors such as the Warn XP 6HP unit. These motors offer greater high speed and mid range torque and have a faster off line retrieval speeds than the Bowmotor 1 and are similar to the Warn XP. The Bowmotor 2 is a very resilient motor and is favoured for “over-volting†(this is when 24v is passed through 12v motors) by many top crews including Croatia Trophy winner Jim Marsden, Malaysian Rainforest Challenge winner Simon Buck, Chris Abel and Steve Gittens. This motor does not like to be stalled and will be damaged if this happens. The motor has an ‘O’ ring seal on the end cap to waterproof it and we recommend sealing the F1, F2 and A terminals with silicon sealant upon fitment. These motors feature heavy duty copper armature windings, which are copper welded to the commutator, with highly efficient roller bearings at each end. Four enormous long lasting brushes enable the motor to run cooler. If fitting to the older Warn 8274 with a keyway type armature shaft, then you will also need to replace the pinion gear with the later type Splined Pinion Gear (FF009666)
Bow Motor 3 - Replacement Winch Motor 12V
£275.00 + VAT
FF Part No. FF008590
Equivalent Part No. BOWMOTOR3
Spec: 9HP 4000RPM - State Winch Details Before Ordering
Detail: These tried and tested incredibly powerful Bow ‘3’s feature the following: The nominal speed is 4,000 rpm, similar to a Bow ‘1’ but with a huge amount of torque and rated at an amazing 9HP. Huge 5†diameter x 10†long (125 x 252mm) housing complete with adaptor to not only help the motor to run cooler, but also to contain a massive armature and copper welded commutator. 8 huge brushes, each with twin insulated flexible copper wires located in solid brass brush holders mounted in a cast aluminium frame to take away some of the heat and provide a bearing block at the back end. 4 large field coils surround the armature all connected with heavy copper bus bars. All in all a motor and a half!! These motors will fit straight onto any GP80 series winch, or any GP Twin Motor Top Housing and, with a small amount of modification to the adaptor, will easily fit to a standard Warn 8274 (instructions supplied) but we would recommend that one of our uprated mainshafts are fitted if not already. To get the best out of these motors you will need a very good battery setup, ideally 3 big 12 volt batteries in parallel driven by a big alternator– a 150 amp one would be brilliant. The supplied adaptor allows these Bow ‘3’s to be bolted onto the Bow ‘1’ & ‘2’ etc fixing holes on the winch.
Discovery 200 Series Winch Bumper
£349.00 + VAT
FF Part No. FF003474
Equivalent Part No. FF31
Spec: Black - fits most WARN & SUPERWINCH winches
Discovery 200 Series Winch Bumper
£295.00 + VAT
FF Part No. FF003511
Equivalent Part No. FF31G
Spec: Galvanised - fits most WARN & SUPERWINCH winches
Discovery 300 Series Winch Bumper - Black
£359.00 + VAT
FF Part No. FF003475
Equivalent Part No. FF31-300
Spec: Black - fits most winches
Ground Anchor
£185.00 + VAT
FF Part No. FF003443
Equivalent Part No. D4X4GA
Spec: Removeable Blade - Recovery Eye at both ends
